2008-2013 Nissan Altima Third Brake Light Replacement

Written By: Zarab Khan
  • Comments: 0
2008-2013 Nissan Altima Third Brake Light Replacement

Difficulty

Moderate

Steps

6

Time Required

10 minutes

Introduction

Here is a guide on how to replace a 3rd brake light bulb on a 2009 Nissan Altima. You will need a screw driver and a replacement bulb. It will take about 5-10 minutes depending on experience to take the old bulb out and install a new one.

  1. BXQi1CwUQmNnDg3F

    • Find the third brake light cover near the back window.

  2. nQGAj42DFGLJynhr

    • Use a plastic pry tool to pry up the third brake light assembly.

  3. mrLMYhfVqlU2QvgN

    • Disconnect the third brake light wire harness.

  4. xflB5qSeS1K4Sxoq

    • Remove the third brake light assembly.

  5. CRWDeNNMD2ZYEqOy

    • Flip the brake light assembly and remove each of the two Phillips screws that secure the LED assembly.

  6. Y3sNEwtjeSRZHfNd

    • Remove the LED assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zarab Khan

Member since: 18/02/25

133 Reputation

0 comments