Unable to boot Windows 8 after Ubuntu installation

Question

I installed Ubuntu on a pc with Windows 8 preinstalled.

After installation Grub showed Ubuntu entries and Windows 8 Boot Manager (or something similar), selecting it I got:

/EndEntire
file path /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,e1800,82000,963b540a6178e211,8d,38)/File(\EFI\Microsoft\Boot)/File(bootmgfw.efi)/EndEntire

error: cannot load image.

After that I run boot-repair with the default options.

This is the file it generated: http://paste.ubuntu.com/6005571

And this grub entries:

• Ubuntu
• Advanced options for Ubuntu
• Windows UEFI bkpbootmgfw.efi
• Windows Boot UEFI loader
• EFI/toshiba/Boot/bootmgfw.efi
• Windows Boot Manager (UEFI on /dev/sda2)
• System setup (Bios menu)

The four about Windows 8 all give a similar error message:

Windows UEFI bkpbootmgfw.efi

/EndEntire
file path /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,e1800,82000,963b540a6178e211,8d,38)/File(\EFI\Microsoft\Boot)/File(bootmgfw.efi)/EndEntire

error: cannot load image.

Windows Boot UEFI loader

/EndEntire
file path /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,e1800,82000,963b540a6178e211,8d,38)/File(\EFI\Microsoft\Boot)/File(bkpbootx64.efi)/EndEntire

error: cannot load image.

EFI/toshiba/Boot/bootmgfw.efi

/EndEntire
file path /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,e1800,82000,963b540a6178e211,8d,38)/File(\EFI\toshiba\Boot)/File(bootmgfw.efi)/EndEntire

error: cannot load image.

Windows Boot Manager (UEFI on /dev/sda2)

/EndEntire
file path /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,e1800,82000,963b540a6178e211,8d,38)/File(\EFI\Microsoft\Boot)/File(bootmgfw.efi)/EndEntire

error: cannot load image.

How can I fix this?

Update:

Following Rod Smith answer I tried wit rEFInd from an USB flash drive.

It shows two Windows icons, one of which work (the other gives an error, it's the one that says Probabbly Grub).

The working one is: Boot Microsoft EFI boot (Boot Repair backup) from 256MiB FAT Volume

So I was able to boot into Windows, now how can I fix this so that I don't have to use rEFInd?

And how can I remove rEFInd from my pc (it shows also after removing the usb flashdrive from the pc)?

Answer 1

My solution to fix the problem is as follows:

Go to bios menu by selecting system setup. Press right arrow to change tabs until you come across secure boot. if it is enabled then disable it. If this works then you might want to disable fast startup as well once you're in Windows.

However disabling fast startup is completely optional. Windows will boot properly even if it is enabled. fast startup should be disabled for those who use files on both Windows and Ubuntu. Or else you might get an Unable to mount the drive error.

Answer 2

Try preparing a USB flash drive or CD-R with my rEFInd boot manager. (Download links for both types of media appear on the download page I've just referenced.) Boot from it. Chances are it will give you two Windows icons with different descriptions. If you're able to boot to Windows from rEFInd using any icon, try installing rEFInd in Ubuntu using the Debian package file. If rEFInd doesn't work or if it works partially but has its own problems, post back with details. (You might want to edit your original question, especially if the problem is complex.) Note that you can adjust the entries that rEFInd shows by cleaning out unwanted boot loaders (files with .efi extensions) from the /boot/efi/EFI directory tree (in Linux) or by editing /boot/efi/EFI/refind/refind.conf and uncommenting and adjusting the dont_scan_files and/or dont_scan_dirs options.